Lan controller v2.5 with DIN mounted case

Informazioni sul prodotto:

Improved and expanded functionalitiy compared to version v2. It works as a web server, which presents readings of various types of sensors: temperature, humidity, voltage, current, events, and allows you to control remotely up to 6 outputs. The device is designed and manufactured in Poland. Set includes Lankontroler and housing with bracket for mounting on DIN rail.

Key features of Lan controller v2.5:

 

•     firmware upgrade via TFTP
•     read data in real time without refreshing page
•     possibility switch on/off to 5 relay direct and 1 transistor output up to 1A from page WWW
•     events panel to self-programming by user
•     Scheduler (switch on/off output for definite time in week days)
•     IP watchdog to five IP device
•     monitoring additional devices eg. PIR sensors
•     environmental temperature and supply voltage on board measurement
•     temperature and current measurement from connected sensors
•     temperature and humidity measurement by DTH22 sensor
•     power measurement for DC voltage
•     power measurement from grid by elecricity meterer impulse
•     possibility to connecting of the additional boards: with 4 switched PoE ports or 4 relays
•     set time manualy or by server NTP
•     posisibility sensors calibration  
•     frequency and duty modified PWM output
•     remote control: each output of Lan controller setup as server can be controlled remotelly by LAN network from inputs of others Lan controllers
•     e-mail notification about programmed events
•     SNMP TRAP notification about programmed events
•     automaticaly send state or value inputs to SNMP server
•     implemented protocols: HTTP, SNMP, SMTP, SNTP, ICMP, DNS, DHCP.
•     supported temperature sensors:  PT1000, DS18B20
•     suppor 1wire protocol

Please note that there could be differences in features for different versions of firmare.
On the other ou can find examples of applications,  technical features and specification, compatybile accesories and escribe of firmware versions.

Technical specification:

•     Supply voltage: 8-28V
•     Power consumption : about 1W
•     PoE supply: YES, passive
•     Interface: ethernet 10Mbit/s
•     Relay: 255VAC 10A
•     Operation temperature: -20 do +85deg C
•     Dimensions: 60x68mm
•     Weight 50g (without casing)

•     5 analog inputs: temperature, voltage, current (by additional boards) and another physics measurements
•     4 digital (logical) inputs: for monitoring, as a pulse counter from energy meter
•     1 digital input for 1wire bus with support for 4 or 6  temperature sensors.
•     1 relay output (NO, NC, C)
•     1 transistor output up to 1A
•     4 outputs to switch relays or transistors
•     4 PWM outputs 2,6KHz - 4MHz
•     supply voltage and temperature monitoring on board
•     reverse polarization protection