Informazioni sul prodotto:
The stabilized power supply is designed for equipment requiring 12 VDC stabilized voltage (-5...+20%). The output voltage can be set within the range 11.0 V ... 15.0 V, using trim pots, independently for each of three sections (each section with three outputs). The total current capacity of the power supply is 3.0 A. The power supply is equipped with three kinds of protections: short circuit protection (SCP) - independent for each output, overload protection (OLP), and over-voltage protection (OVP). Its metal casing (color: RAL 9003), mountable on a wall, is equipped with LEDs signaling input and output voltages.
The power supply outputs are divided into three sections: A, B and C. Each section has an independent stabilizer with individual potentiometer to adjust its output voltage, and PTC polymer over-current protection. In the case the total current of a section exceeds 1.6 A, it will be automatically cut off (and the LEDs of the section will go off as well). The output voltage of the section can be restored (after eliminating the cause of the failure) by disconnecting all the three outputs or switching off the AC power for at least one minute, and connecting the outputs again or switching on the AC power.
The outputs A1...C3 are separately fused with 500 mA cut-outs or PTC current limiters. The selection of protection elements is performed by setting jumpers.
In the case of choosing cut-out(s), a failure in the circuit of the output (short circuit/overloading) will result in blowing the fuse element and disconnecting the faulty circuit from the other ones (the LED connected to the output will go off). After eliminating the cause of the event, the cut-out has to be replaced with an identical one. Voltage presence at the outputs of the power supply unit is indicated by LEDs on the front panel.
AC input voltage |
Output voltage |
Transformer
|
Rated total output current |
Number of outputs
|
Maximum load current of single output |
Short circuit protection |
Overload protection |
Overvoltage protection |
Operating temperature |
Dimensions (W x H x D) |
Weight |
Remarks |
If a circuit is protected with polymer PTC, in the case of short circuit/overloading the output current is limited to a very small value and the corresponding LED also goes off. After disconnecting the circuit and eliminating the cause of the failure, it can be powered again (not earlier than after one minute).
Il disciplinare:
AC input voltage
Output voltage
Transformer
Rated total output current
Number of outputs
Maximum load current
of single output
Short circuit protection
Overload protection
Overvoltage protection
Operating temperature
Dimensions (W x H x D)
Weight
Remarks |
AC 230V, 50Hz
12 VDC (adjustable 11-15 V)
80 VA
9x0.33 A
9
0.33 A
0.5 A fuses or PTC
3x 1.6 A PTC
VDR
-10...40 °C
230 x 230 x 90 mm
3.2 kg
Metal casing
|
Assistenza tecnica
Comprando da noi ottieni un accesso gratuito all:
- assistenza tecnica per la merce acquistata,
- aiuto per la configurazione dell’apparecchiatura.,
- ottieni un prodotto sottoposto a prove e verificato individualmente dagli nostri specialisti,
- tutti i nostri prodotti sono coperti da una garanzia,
- i prodotti sono provenienti direttamente da produttori.
Chiedi
Garanzia
In caso di successivo diffetto o anomalia nel funzionamento delle apparecchiature, puoi ottenere riparazioni gratuite, coperte da garanzia oppure nostro servizio assistenza post-garanzia.
Tutti i prodotti venduti da noi, conformemente al diritto polacco, sono coperti dalla garanzia del produttore oppure dalla garanzia del venditore (noi).
Richiedi un servizio