Stabilized power supply AWZ05122 12/5x0.4A
produttore: Pulsar Sp.j.
ID: 1381
Prezzo netto: 118.96 zł
Prezzo lordo: 146.32 zł
For any technical questions, ask a specialist
CCTV specialist
Informazioni sul prodotto:
The stabilized power supply unit is designed for equipment demanding stabilized voltage of 12 VDC. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter response time to any changes than in the case of a switching regulator.
The unit has 5 outputs (O1...O5) separately fused with 500 mA cut-outs or PTC current limiters. The selection of protection elements is performed by setting jumpers.
In the case of choosing cut-out(s), a failure in the circuit of the output (short circuit/overloading) will result in blowing the fuse element and disconnecting the faulty circuit from the other ones. After eliminating the cause of the event, the cut-out has to be replaced with an identical one. Voltage presence at the outputs of the power supply unit is indicated by LEDs on the front panel.
If a circuit is protected with polymer PTC, in the case of short circuit/overloading, the output current is limited to a very small value and the corresponding LED goes off. After disconnecting the circuit and eliminating the cause of the failure, it can be powered again (not earlier than after one minute).
In the case of choosing cut-out(s), a failure in the circuit of the output (short circuit/overloading) will result in blowing the fuse element and disconnecting the faulty circuit from the other ones. After eliminating the cause of the event, the cut-out has to be replaced with an identical one. Voltage presence at the outputs of the power supply unit is indicated by LEDs on the front panel.
If a circuit is protected with polymer PTC, in the case of short circuit/overloading, the output current is limited to a very small value and the corresponding LED goes off. After disconnecting the circuit and eliminating the cause of the failure, it can be powered again (not earlier than after one minute).
The output voltage is preset at the production stage to 12 V. For installations with considerable voltage drops across the resistance of the wires, it is possible to adjust the voltage level with a trim pot. The power supply unit has been designed according to the EU EMC and LVD requirements.
Power Supplies
Stabilized
Stabilized power supply: ZS 12/5x0.4A AWZ05122 (metal housing)
Code: M18286
Price
Disc.
Quantity
32.89 EUR
0 %
View of the power supply
Rear view
The stabilized power supply unit is designed for equipment demanding stabilized voltage of 12 VDC. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter response time to any changes than in the case of a switching regulator.
The unit has 5 outputs (O1...O5) separately fused with 500 mA cut-outs or PTC current limiters. The selection of protection elements is performed by setting jumpers.
In the case of choosing cut-out(s), a failure in the circuit of the output (short circuit/overloading) will result in blowing the fuse element and disconnecting the faulty circuit from the other ones. After eliminating the cause of the event, the cut-out has to be replaced with an identical one. Voltage presence at the outputs of the power supply unit is indicated by LEDs on the front panel.
If a circuit is protected with polymer PTC, in the case of short circuit/overloading, the output current is limited to a very small value and the corresponding LED goes off. After disconnecting the circuit and eliminating the cause of the failure, it can be powered again (not earlier than after one minute).
In the case of choosing cut-out(s), a failure in the circuit of the output (short circuit/overloading) will result in blowing the fuse element and disconnecting the faulty circuit from the other ones. After eliminating the cause of the event, the cut-out has to be replaced with an identical one. Voltage presence at the outputs of the power supply unit is indicated by LEDs on the front panel.
If a circuit is protected with polymer PTC, in the case of short circuit/overloading, the output current is limited to a very small value and the corresponding LED goes off. After disconnecting the circuit and eliminating the cause of the failure, it can be powered again (not earlier than after one minute).
The output voltage is preset at the production stage to 12 V. For installations with considerable voltage drops across the resistance of the wires, it is possible to adjust the voltage level with a trim pot. The power supply unit has been designed according to the EU EMC and LVD requirements.
Il disciplinare:
| AC input voltage Output voltage Transformer Rated total output current Number of outputs Maximum load current of single output Short circuit protection Overload protection Overvoltage protection Operating temperature Dimensions (W x H x D) Weight Case |
230 VAC, 50 Hz 12 VDC (adjustable 11-15 V) 50 VA 2 A (5x 0.4 A) 5 0.4 A 0.5 A fuses or PTC 2.5 A PTC VDR 0...45 °C 205 x 205 x 80 mm 2.5 kg Metal |
Assistenza tecnica
Comprando da noi ottieni un accesso gratuito all:
- assistenza tecnica per la merce acquistata,
- aiuto per la configurazione dell’apparecchiatura.,
- ottieni un prodotto sottoposto a prove e verificato individualmente dagli nostri specialisti,
- tutti i nostri prodotti sono coperti da una garanzia,
- i prodotti sono provenienti direttamente da produttori.
Garanzia
In caso di successivo diffetto o anomalia nel funzionamento delle apparecchiature, puoi ottenere riparazioni gratuite, coperte da garanzia oppure nostro servizio assistenza post-garanzia.
Tutti i prodotti venduti da noi, conformemente al diritto polacco, sono coperti dalla garanzia del produttore oppure dalla garanzia del venditore (noi).
-
Cyberteam Sp. z o.o.
ul. Strefowa 8,
22-400 ZamośćE-mail: cyberteam(at)cyberteam.pl