Indoor Hanging RACK Cabinet 19" 9U 600mm Black
Manufacturer: Cyberteam Sp. z o.o.
ID: 5019
Net price: 295.00 zł
Gross: 362.85 zł
Product information:
19" RACK cabinet designed for indoor use.
Technical specification:
- external/usable dimensions - 441.5x560x400mm/439x555x366mm
- weight - 10.8kg
- material - 1 mm thick S235 steel sheet characterised by:
- high tensile strength
- high fatigue strength,
Used for welded constructions, load-bearing and dynamically loaded, protected by a stove-applied paint coating - RAL 9005 colour
ATTENTION - the cabinet does not have a back wall.
Designed for:
- indoor installation
- surface mounting, application/use, e.g. for the construction of telecommunications and optical fibre installations, in order to:
- protect the equipment contained therein from unauthorised access and action - including destructive activity - by unauthorised parties,
- provide organisation and proper working conditions for the equipment installed within.
- 19" rack rails to mount components with a maximum depth of 330 mm
- possibility of adjusting/shifting the rails - up to 10 mm
- minimum distance of the rails from the door - 50 mm (maximum 60 mm)
- additionally - after flipping the rack rail - possibility of increasing the distance from the door by 30 mm
- An innovative solution which does not determine the orientation of the cabinet in terms of the “ceiling-floor” which allows the cabinet to be mounted “upside down” while maintaining its full functionality
- An innovative assembly system that allows the following:
- mounting to the wall - and precise levelling - of the mounting and support rail itself;
- hanging the cabinet on the mounting and support rail fixed to the wall
- fixing and securing the suspended cabinet on the rail, with two extension bolts (fixed from inside the cabinet);
- single-leaf door, which - thanks to the solution that does not determine the orientation of the cabinet - can be opened to the left or to the right without the need to reposition the door
- locking cylinder lock with a key for single-point locking,
- spring-loaded slide-in hinge allowing tool-free door removal
- 2 openings of 100x50mm (one each in the upper and lower wall)
- the ability to introduce cables into it directly ‘from the wall’ thanks to the lack of a back panel, and thus the safety of the cables
- cable entry/exit through openings in both the top and bottom of the cabinet
- Resistance - against external mechanical impact - at IK 09 rating
- increased functionality - due to the ability to open the door to the right or left side
- electrical continuity - through conductive structural parts of the enclosure.
ATTENTION - if the cabinet is used for the installation of electrical equipment, the cabinets should be earthed. Tape or wire with a minimum cross-section of 6 mm2 should be used for earthing. A toothed pad should be used between the earthing clip and the pressure nut to prevent the earthing from spontaneously unscrewing.
"In terms of dimensions and design, cabinets in accordance with: PN-EN-60297-3-100:2009 (IEC 297-2; DIN-4194-1; DIN-4194-7; DIN-4188) and ANSI/EIA RS-310-D."
Product specification:
| External/utility dimensions Weight Material Minimum distance of rails to door Maximum distance of rails to door Mechanical strength Locking |
441,5x560x400mm/439x555x366mm 10.8kg S235 steel sheet 1mm thick 50mm 60mm IK 09 single point door locking cylinder lock |
Technical assistance
When you buy a product in our store, you get free access to:
- technical support for purchased products,
- and help in the hardware configuration,
- get a product inspected and tested by our experts,
- we give guarantee for products,
- import products directly from producers.
Warranty
If there are any faults with this product, you can use the free repair warranty or post-warranty service of our service.
All products sold in our shop, according to Polish law, have a manufacturers guarantee or warranty seller, in this case our shop.
-
Cyberteam Sp. z o.o.
ul. Strefowa 8,
22-400 ZamośćE-mail: cyberteam(at)cyberteam.pl