• / O nas

Cyberteam


Welcome to Cyberteam® Sp. z o.o.!


The headquarters of Cyberteam® Sp. z o.o. is located in the economic zone in Zamość, at 8 Strefowa Street, and is part of the Nowak Technologie Group. Our area of operation is spread across entire Europe. This page is where we will introduce you to our business, share with you how the Cyberteam® company came into being, and outline the directions in which our Group is developing. Come and take a look.

 

 

1978

The story of our company dates back to 1978, when the first, and for a long time, only Mechanical Wompany in the region was established. At the time, our business was focused on repairing mechanical equipment and making hard-to-find mechanical components. From the very beginning, we employed a team of more than 15 skilled workers and our factory covered a spacious area of more than 300 m2.

1999

  More than 20 years later, i.e. in 1999, the Mechanical Plant entered the technologies of the 21st century, already as Nowak Technologie®. Most of the mechanically controlled machines were replaced by CNC machines. The primarily service-based business to date has been enhanced by the small batch production of various metal components. Engine head guides, engine parts washers or engine head pressure leak testers are just a few examples.

2007

  The dynamic development of the telecommunications industry in Poland and worldwide resulted in the establishment of Cyberteam® Sp. z o.o. Since 2007, as part of the Nowak Technologie® Group, the main business profile of Cyberteam® Sp. z o.o. has been the telecommunications industry. Designed jointly with the IT Department of the West Pomeranian University of Technology in Szczecin, the line of microwave antennas was continuously supplied to the Polish and European markets for 12 years. The widespread use of wireless internet access results in increased traffic in the 2.4 and 5 GHz frequencies. In response, Cyberteam® Sp. z o.o. designs and reserves shielding patterns for popular client devices such as MikroTik and Ubiquiti, which are designed to isolate the device from unwanted electromagnetic noise. The expanding market offers increasing opportunities. A division for the design and production of electronic circuits was created at Cyberteam® Sp. z o.o. A full range of LAN surge protectors is coming to market: the popular 'netprotectors', PoE adapters and buffer power supplies. Cyberteam® Sp. z o.o. conducts all sales of the Nowak Technologie® group on the website www.cyberteam.pl.

2012

  Using the potential of mechanics and electronics, a new company, Elektropuls®, joins the Nowak Technologie® Group in 2012. The designed and manufactured equipment for nerve and muscle stimulation meets the needs of the medical industry. The company follows the ISO 13485:2016-04 quality management system. The stimulator, branded Elektropuls®, is authorised for use in hospitals, physiotherapy clinics and even recommended for home use.

2016

  As the telecommunications industry develops, broadband technology is becoming more and more accessible to the end user. Wireless networks are gradually being replaced by fibre-optic networks. Another development opportunity is emerging. The Group launches a full range of products for the comprehensive construction of fibre-optic networks. Active equipment and fibre optic passive components, telecom cables and cabinets. This product line is branded FiberTechnic® and distributed by Cyberteam® Sp. z o.o.

2022

  The ever-increasing production of aluminium components for the FiberTechnic® brand naturally results in the expansion of production lines. Nowak Technologie® is launching a new powder paint facility, thereby expanding its offer with another service. A new hall is being built on the company's premises, which houses an 80-metre powder coating production line using a process appropriate to QualiCoat. The technological capacity of the painting line is the ability to paint 500 m2 during one shift.

cyberteam


Welcome to the Cyberteam® Sales Department

We are a sales team with extensive knowledge of the equipment and accessories in our vast portfolio. We offer assistance with product selection and configuration. We constantly improve the quality of service through ongoing trainings to ensure the best experience for our customers. Not only do we take care of our customer's individual needs, we also present our brand at numerous international and national trade shows, building our presence in the market.

We also work with our technical department to provide support in the design of new products on customer demand. Our wide product range and large stock levels allow us to handle orders quickly and flexibly, meeting customer expectations to the full. Our sales department is always ready to take on the challenge and find the best solutions to meet even the most demanding customer needs. We are proud of our role in creating long-term business relationships based on trust, professionalism and excellent service.

 

If you would like to contact us, please visit 

Contact Page


 

 

Machinery Park

 

Our machine park is where innovative technology and precision manufacturing come together. This state-of-the-art machinery park provides unparalleled production quality and flexibility to create a variety of customer solutions. The machinery park includes cutting-edge equipment such as laser cutting, CNC bending, stamping, welding and assembly systems. This combination of advanced technologies allows the most demanding aluminium cabinet manufacturing projects to be realised. Thanks to laser cutting, it is possible to precisely and efficiently cut aluminium components of various shapes and dimensions. CNC bending, on the other hand, ensures excellent quality of bent profiles. The machine park also uses advanced welding techniques, which guarantee durable and aesthetically pleasing connections of aluminium components. The use of assembly systems speeds up the production process, allowing large orders to be completed in a short period of time. In addition to excellent machinery, the park also has a highly qualified team of specialists who have a wealth of experience in working with aluminium. It is their knowledge and skills that lead to each project being carefully developed and realised according to the customer's individual demands. The machine park is a perfect combination of modern technology and craftsmanlike precision. As a result, we are able to supply products of the highest quality, meeting high expectations in terms of aesthetics, durability and functionality.



Gasket Dispenser

Salvagnini bending centre

Laser welder

Wylewarka uszczelek Salvagnini spawanie-laserowa
For all products such as cabinets, enclosures and other items that require airtightness, we employ a sealing method using a polyurethane poured gasket. This is a solution in which liquid sealant is applied to the area that needs to be tightened.
We achieve the shapes and complex bends of the workpiece impossible to achieve on press brakes and bending machines using the Salvagnini P2 Lean bending centre. Curve bending, hinge bending, bending on all 4 sides, any number of bends on each side, stamping movements reducing the possibility of leaving marks on the sheet. Full automation of the entire machining process.
Laser welding uses a high energy density beam, reaching approximately 1 MW/cm². This process results in a narrow heat-affected zone and minimal temperature impact on the structure, which contributes to rapid heat dissipation and short weld cooling times. The possible width of the welds obtained varies between 0.2 and 13 mm, but in practice welds of small widths are most commonly used. The depth of penetration of the material by the laser beam depends on the power supply, but also on the location of the beam focus and the welding speed.



Laser burners

CNC lathes

Press brakes

 laser  tokarki cnc prasa keawedziowa 

Laser technology is used to precisely cut a wide variety of components in metal. The unquestionable advantages of this method of metal processing are a perfect cut surface requiring no further processing, minimal material loss, narrow burning path, high cutting speed, and fully automated and repeatable production.

CNC lathing ensures high precision and repeatability of lathed parts, which is virtually impossible to achieve with manual work. Orders are executed on a CNC CK32L lathe with an inclined bed, which is characterised by high productivity compared to other machines of this type. It is perfectly suited to serial machining.
For precise bending, we use CNC press brakes from renowned manufacturers such as Safan, Darley, Vimercati and Salvagnini. The use of edge bending machines from well-established manufacturers guarantees the highest quality of plastic sheet metal processing. Machines with different press force from 40 – 100 tonnes and bending lengths up to 3100 mm.



Powder coating plant

Punching machines

Welders

 malarnia  wykrawarka
All our products are protected by a paint coating. The powder coating process takes place in an automated cycle on two independent lines with a total length of 80 metres. Full automation of the process line and many years of experience using the latest technology guarantee the durability of the paint coating for a period of 25 years.
Sheet metal punching is carried out on Trumph machines with maximum flexibility. The selection of tools for each application is extremely straightforward; not only can we punch, but we can also emboss, punch vents, bend and thread holes.
Welding of steel, aluminium stainless steel.




 




 

 

 Values  Mission  Vision
 
Our priority is to ensure the safety of users and third parties through the mindful actions of our staff. We continually improve our practices by providing training and strict quality control. Our dedicated team acts with complete care, keeping the welfare of our customers and communities in mind. We pride ourselves on the reliability and trust we build. The motivation and accountability of our staff is key, and we strive to be a safety leader, ready for any challenge. Our company is shortening the distance to excellence to provide protection you can rely on.
 
We provide customers with safe and modern, high-quality products that meet expectations and legal requirements. We continuously improve our solutions, taking into account the latest technologies. We strive to exceed our customers' expectations and ensure their complete satisfaction. Our company takes care of every detail, from raw materials to quality control. We take pride in providing customers with products that meet the highest standards as a reliable partner. Our commitment is to high quality and innovation.
 
We strive for partnerships and beneficial relationships with all parties: customers, suppliers and other external businesses. This is key to the long-term operation and growth of the company. We invest in mutual understanding, trust and benefits. Solid relationships are the foundation of our success. We are building a network of relationships that promotes growth for all parties. This is our recipe for success.

 

 


Our brands

   

 

 

 


Main production lines

 szafy

 Telecommunications cabinets

 GPON - OLT / ONU

 Fiber optics cables

 Fiber optic patch panels

 

 

 

SZKOLENIA-CYBERTEAM-FIBERTECHNIC


Trainings

Welcome to Cyberteam® training! We are an experienced team that has been offering practical fibre optic training called " Hands-on training in fibre optic techniques" for the last 5 years. Our training courses are dedicated to both installers and beginners in fibre optic technology. Our aim is to prepare participants to professionally perform fibre optic installation services. We know how important it is for our trainees to have full confidence in their skills and to be prepared for all the challenges that the job of a fibre optic installer presents.

Our training courses take place on a specially prepared outdoor training ground. This gives participants direct exposure to the realities of an installer's job, regardless of the weather conditions. In the open air, our trainees gain valuable experience that will allow them to hone their skills in action.If you own a company and have employees you would like to give training in fibre optic installation, our course will be the perfect solution. We'll prepare your staff to perform fibre optic installation tasks to the highest standard.

Join our Hands-on Fiber Optic Technician Training and gain essential skills in the dynamic world of fiber optic technology.

 

 

Find the current course here!

 

 

2021 r.
Operational Programme: Regional Operational Programme for Lubelskie Voivodeship 2014-2020
Activity: 4.2
Name and address of Beneficiary: Nowak Technologie Tomasz Bartłomiej Nowak
ul. Strefowa 8, 22-400 Zamość
Number and title of project: RPLU.04.02.00-06-0156/20
Production of energy from renewable sources at Nowak Technologie
Number of Grant Agreement: RPLU.04.02.00-06-0156/20-00
 
2020 r.  
Operational Programme: Regional Operational Programme for Lubelskie Voivodeship 2014-2020
Thematic priorities: III competitiveness of SMEs
Activity: 3.7
Name and address of Beneficiary: Nowak Technologie Tomasz Bartłomiej Nowak
ul. Strefowa 8, 22-400 Zamość
Number and title of project: RPLU.03.07.00-06-0154/16
Start of production of innovative telecommunication cabinets
Number of Grant Agreement: RPLU.03.07.00-06-0154/16-00
 
2017 r.
Operational Programme: Regional Operational Programme for Lubelskie Voivodeship 2007 - 2013
Thematic priorities: III competitiveness of SMEs
Activity: 3.7
Name and address of Beneficiary: Nowak Technologie Tomasz  Bartłomiej Nowak
ul. Strefowa 8, 22-400 Zamość
Number and title of project: RPLU.03.07.00-06-0043/20
Implementation of R&D results into production of innovative sectional cabinets
Number of Grant Agreement: RPLU.03.07.00-06-0043/20-00

 

 

2015 r.
Operational Programme: Regional Operational Programme for Lubelskie Voivodeship 2007 - 2013
Thematic priorities: I. Entrepreneurship and Innovation
Activity: 1.3
Name and address of Beneficiary : Cyberteam Spółka z o.o.
Kalinowice 157, 22-400 Kalinowice
Number and title of project: 02.11-WND-RPLU.01.03.00-06-041/11,
Start of production of four innovative antennas with casing by Cyberteam Sp. z o.o.
Number of Grant Agreement: 02.11-UDA-RPLU.01.03.00-06-041/11

 

 

2014 r.
Operational Programme: Regional Operational Programme for Lubelskie Voivodeship 2007 - 2013
Thematic priorities: I. Entrepreneurship and Innovation
Activity: 1.3
Name and address of Beneficiary : Nowak Technologie Tomasz Bartłomiej Nowak
Kalinowice 157, 22-400 Kalinowice
Number and title of project: 12.12-WND-RPLU.01.03.00-06-007/13,
Start of production of engine head leak tester
Number of Grant Agreement: 12.12-UDA_RPLU.01.03.00-06-007/13

 

 

2012 r.
Project number: RPLU.01.02.00-06-005/10
Name of project: Start of production of innovative integrated Airbox23 eco antennas
by Cyberteam Sp. z o.o.
Beneficiary: Cyberteam Spółka z o.o.
Address: Kalinowice 157, 22-400 Kalinowice

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Charity activities

Cyberteam is a company with a big heart! For years, we have been involved in charity work, undertaking various initiatives to support communities in need. Our mission is to combine fibre optic light with the promotion of social well-being. We support charities that focus on different fields such as environmental protection, support for disadvantaged children and families, education and fight against poverty. By working in these areas, we aim to bring real change and improve the lives of those in need.

We are proud to be able to give hope to others and change their lives through our charitable work. We believe that every little help can make a tremendous difference. We are happy to be part of a positive change in society and believe that our charitable work benefits those in need as well as ourselves. We want to inspire others to join us in building a better world through generosity, empathy and community involvement. Together we can do great things!

 

In solidarity with Ukraine

 

 

 

Noble Gift

 

 

 

Certyfikat

The PN-EN ISO 3834-2:2021-09 series standards are intended for organisations that use welding processes in manufacturing their own products. They contain quality requirements for the welding of metallic materials, although they may be adapted for other welding processes. They refer to the very quality of products that can be affected by welding. Three standards are used for certification purposes:

  • PN-EN ISO 3834-2:2021 containing full quality requirements
  • • PN-EN ISO 3834-3:2021 containing standard quality requirements
  • • PN-EN ISO 3834-4:2021 containing basic quality requirements

ISO 3834 provides a procedure for estimating an organisation's ability to manufacture products of a certain quality, regardless of the type of construction. In addition to its universality of application, the standard ensures also:

  • Improved quality of manufactured products
  • Validation of competence in the production of welded products
  • Facilitating compliance with the Pressure Directive 97/23/EC



 

 

Discover the most important Cyberteam® designs featuring the PN-EN ISO 3834-2 certification
testifying to the full quality requirements for welding processes.

 


OUTDOOR CABINETS

 

ipi10 szafy zewnetrzne szafy zewnetrzne szafy zewnetrzne szafy
Ipi10 12-18U 22-24U  30-42U  Szafy na zamówienie
Click to see them all!  Click to see them all!  Click to see them all!  Click to see them all!  Click to see them all!

 


HERMETIC and DISTRIBUTION CABINETS

 

szafki słupki
Hermetic cabinets Distribution cabinets
 Click to see them all!  Click to see them all!

 


 

 Certyfikat


    Visit us on

 
Information regarding cookies on this website

Our website uses cookies (ie. Cookies) for statistical, advertising and functional. Thanks to them, we can customize the site to your needs. Anyone can accept cookies, or has the ability to disable them in your browser, so you will not collect any information.